![K'NEX Church](kitchurchm.jpg)
K'NEX Church
This simple K'NEX church can be built using a K'NEX Base kit.
![K'NEX Church 1](kitchurch1.jpg)
First, assemble the fifteen 3D connectors shown in the photo opposite.
Please visit Handy Hint A4 if you need help to do this.
![K'NEX Church 2](kitchurch2.jpg)
Next build the end of the nave
![K'NEX Church 3](kitchurch3.jpg)
the sides of the nave
![K'NEX Church 4](kitchurch4.jpg)
the top of the nave
![K'NEX Church 5](kitchurch5.jpg)
and join them together as shown.
![K'NEX Church 6](kitchurch6.jpg)
Now build the two sides of the tower
![K'NEX Church 7](kitchurch7.jpg)
the back of the tower
![K'NEX Church 8](kitchurch8.jpg)
the wall of the tower that joins on to the nave
![K'NEX Church 9](kitchurch9.jpg)
..and join them all together as shown.
![K'NEX Church 10](kitchurch10.jpg)
Then join the tower to the nave.
![K'NEX Church 11](kitchurch11.jpg)
Now make the four sides of the steeple
![K'NEX Church 12](kitchurch12.jpg)
the cross
![K'NEX Church 13](kitchurch13.jpg)
and assemble the steeple as shown.
![K'NEX Church 14](kitchurch.jpg)
Finally, add the steeple onto the model.
Your church is now complete.